AdvancedFrame™ Convertible Inatable Kayak Owner’s Manual
11
Figure 3. Plastic Bow and Stern Insert
INFLATION TIPS
Use either a bellows style foot pump or two-way hand pump to inate to your kayak. Be sure that
the ing on the pump hose ts snug in the valve on the kayak. NEVER USE COMPRESSORS,
CO2, OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use
high-end military style, plunger valves (See Figure 1).
3.4 Over Ination
CAUTION: Water temperature and weather will aect the air pressure of the kayak. In cold
weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
3.5 Deation
1. Remove the caps from chamber 1 & 2.
2. Push stems inward and rotate to deate position (See Figure 1).
3. Open twist valves on chambers 3 through 6.
4. Once the chamber is deated you can use your pump to vacuum out any additional air for
improved folding. This requires a pump capable of deating.
3.6 Folding
NOTICE: Reverse your pump to completely deate all chambers.
1. Completely deate all air chambers, thoroughly dry kayak and remove the seat. Reversing
your pump to pump out all the remaining air will make folding easier.
Commentaires sur ces manuels