Advanced-elements AE1012 Manuel d'utilisateur télécharger pdf (Page 11)

AdvancedFrame™ Inatable Kayak Owner’s Manual

Figure 3. Plastic Bow and Stern Insert

INFLATION TIPS

Use either a bellows style foot pump or two-way hand pump to inate your kayak. Be sure that

the ing on the pump hose ts snug in the valve on the kayak. NEVER USE COMPRESSORS,

CO2, OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use

high-end military style, plunger valves (Push in and twist to activate the spring-loaded check

valve for inflating, or push-in and twist to lock open for deflating).

3.4 Over Ination

CAUTION: Water temperature and weather will aect the air pressure of the kayak. In cold

weather and water your kayak will lose some pressure. If this occurs, you may want to add a

bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air

inside the kayak will expand. You must let some air out of the appropriate chambers to prevent

the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme

temperatures (hot or cold).

3.5 Deation

1. Remove the caps from chamber 1 & 2.

2. Push stems inward and rotate to deate position (See Figure 1).

3. Open twist valves on chambers 3 through 7.

4. Once the chamber is deated you can use your pump to vacuum out any additional air for

improved folding. This requires a pump capable of deating.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Advanced-elements AE1012 Manuel d'utilisateur Page 11